Con l'acquisto di questo articolo riceverai 1 Fraiser point per ogni euro speso. Entra subito nel Club dei Fresatori più grande del Mondo. Info
Image Total length (L) SkuPriceBuy
 ORANXIBLE 1000 OX-1000 $69.97 VAT included
 ORANXIBLE 1200 OX-1200 $95.04 VAT included
 ORANXIBLE 2000 OX-2000 $186.31 VAT included
Description
ORANXIBLE  - Flexible templates for curved and arched routing
Applications

● Oranxible, the plexible template for milling, can be fastened with screws on any wood panel, MDF and cheapboard for the quick and secure creation of shapes. For the fastening can also be used traditional flast head screws which are widely available on the market. The bushing is made of a very elastic and resistant plastic, which can be easily knotted without losing flexibility.

● What you have to do is screw the bushing at the edge of the panel and mill the outline on the guide link. The folding bushing is suitable for manual feed on milling machines and workbenches. You will be able to mill lots of shapes in a very quick, secure and accurate way, including arches, curved elements and cut shapes. Outline the profile of the shape in a very precise way and fasten it on the inferior part of a panel which had already been positioned undernith it.

● If you mill with a guide link mounted directly on a toupie machine, your hands will at a safe distamce behind the bushing. You will find two profiles in three lengths; please do notice that the smallest profile has the smallest radious, while the biggest profile presents a wide opening in case of long and flat curves

Reccomandations

● If you mill with a guide link mounted directly on a toupie machine, your hands will at a safe distamce behind the bushing. You will find two profiles in three lengths; please do notice that the smallest profile has the smallest radious, while the biggest profile presents a wide opening in case of long and flat curves

FAQ - What you need to know to be a winning miller

How do I request the work parameters?

If you would like to receive the specific working parameters for your machining, immediately after you have purchased the Fraiser bits you must write us an email to assistenza@fraisertools.com specifying the following:

  1. order number
  2. type of wood to be processed
  3. available milling machine (manual, vertical on bench, spindle moulder, CNC), maximum power and speed (maximum and if fixed or adjustable)
  4. brief description of the work to be carried out

In this way our experienced engineers and technicians will have all the necessary information to communicate to you in a short time the working parameters ideally correct for your specific case.

BITTOP, to TRIPLE the duration of your strong Fraiser router bit

BITTOP is an exclusive product that serves to optimize and protect your Fraiser cutter, helping it to last three times longer than ALL OTHER alternatives.

It was created to make the most of your milling cutter, a special concentrated formula designed by us that can maintain and preserve the tools, greatly increasing their durability.

How does it work?

Once the cutter has been cleaned (with products such as TOOLSNER 3.0), before placing it in its box, just a few more drops, scattered with a finger or directly from the bottle (not with the cloth, would not remain in the cutter but would be absorbed by it ... and do not worry that it is environmentally friendly and non-toxic) in the stem and head, to keep it in perfect condition until the next use.

Here's that in a few seconds, every time you will have a tool at the height and always well guarded, ready to face the most extreme of processing.

Of course, be careful not to cut yourself, we decline any responsibility.

When am I entitled to receive BITTOP?

BITTOP is an exclusive FRAISER and is not sold separately, you can only have it with the purchase of a Fraiser cutter. (not even with an accessory or non-fraiser bit, only with the purchase of a cutter directly shipped from our store)

Read yourself what the millers who chose the strong italian bit for wood say about us

IFI
Imab
Samiel Maias
Legno Lab
Get Hands Dirty
Stefano il falegname
Makers At Work
Il Pancalaio Matto
FRAISER S.r.l. - Via Luigi Galvani, 7 – 61033 – Fermignano (PU) | P.IVA IT02623070410 | €10.000 i. v. | amministrazione@fraisertools.com | Copyright FraiserTools