Con l'acquisto di questo articolo riceverai 1 Fraiser point per ogni euro speso. Entra subito nel Club dei Fresatori più grande del Mondo. Info
Image Diametro (D) Altezza di taglio (I) Lunghezza totale (L) Shank (S) Rotazione SkuPriceBuy
0735720368498 10 35 80 10 RH P305.100.10D £84.03 VAT included, if applicable. Customs duties, if applicable, to be paid by the customer. In stock
0735720368504 12 35 80 12 RH P305.120.12D £105.05 VAT included, if applicable. Customs duties, if applicable, to be paid by the customer. Low stock
0735720368511 16 55 110 16 RH P305.160.16D £171.90 VAT included, if applicable. Customs duties, if applicable, to be paid by the customer. In stock
0735720368528 16 75 130 16 RH P305.160L.16D £207.23 VAT included, if applicable. Customs duties, if applicable, to be paid by the customer. Out of stock
0735720368535 20 55 110 20 RH P305.200.20D £232.32 VAT included, if applicable. Customs duties, if applicable, to be paid by the customer. Low stock

This cutter has, depending on the diameter, 2 or 3 negative cutting propellers combined with light chip breakers that allow you to advance in the piece at high speed with passes limited to 1 diameter of the cutter, ensuring a good finish in the upper part of the wood (the side of the cutter tang that is).

With the negative you can also process a laminate or other coated wood, without the risk of tearing off the coating.

BOSS BEAVER line of CNC milling cutters, covered with diamond powder, exclusive to Fraiser!

Thanks to the special coating, the BOSS BEAVER by Fraiser bits allow you to destroy the problems related to abrasion, sliding and chemical aggression, allowing you to make the cutter last 3 to 4 times longer - compared to a NON-covered (but professional, be careful!) cutter.

Don't lag behind your competitors or friends, you too can enter the new galaxy of router bits for wood.

  • Longer machining life (from 3 to 4X), thanks to the special coating. Increase productivity and reduce maintenance!
  • Lower machining temperature thanks to lower friction of the coated cutter. Avoid burning the workpiece!
    Greater Smoothness of the Chip, therefore less adherence for waste and glue harmful to your cutter and your pieces, which will not remain stuck
  • Possibility to work the Plastics without lubricant, essential if you do not have the cooling system and do not want to "pollute" the piece with oil
  • Excellent finish, with great capacity of chip discharge (I're already used to it with normal Fraisers...but I'll write it to you anyway)
  • Significant savings over time thanks to longer life and less maintenance

● To encircle, section and shape on hard wood and its derived, on laminate and plastic material..

● They can also be inserted on mandrels or on adaptors for machining centres, on point to point machines and on CNC pantographs

Ideal for

● Any type of hard wood and its derived

● Laminates



● Plastic material


● Never use consumed or damaged router bits.

● Work with an adequate speed of progress, never force the tool

● Be particularly careful when enter the wood with router bits that have a small diameter

● Clean the tool with the supplied liquid "BITTOP" In order to obtain better results with small diameters, carry out the cut several times

FAQ - What you need to know to be a winning miller

How do I request the work parameters?

From today you can find the parameters of your CNC router Bits directly in your account.

Just be registered at the time of purchase and, depending on the milling cutter purchased, you will unlock the code in the parameters section that you can find here

If you have not logged in before completing your order and would like to receive the specific working parameters for your processing, you must write us an email to specifying the following:

  1. order number
  2. type of wood to be processed
  3. available milling machine (manual, vertical on bench, spindle moulder, CNC), maximum power and speed (maximum and if fixed or adjustable)
  4. brief description of the work to be carried out

In this way our experienced engineers and technicians will have all the necessary information to communicate to you in a short time the working parameters ideally correct for your specific case.

BITTOP, to TRIPLE the duration of your strong Fraiser router bit

BITTOP is an exclusive product that serves to optimize and protect your Fraiser cutter, helping it to last three times longer than ALL OTHER alternatives.

It was created to make the most of your milling cutter, a special concentrated formula designed by us that can maintain and preserve the tools, greatly increasing their durability.

How does it work?

Once the cutter has been cleaned (with products such as TOOLSNER 3.0), before placing it in its box, just a few more drops, scattered with a finger or directly from the bottle (not with the cloth, would not remain in the cutter but would be absorbed by it ... and do not worry that it is environmentally friendly and non-toxic) in the stem and head, to keep it in perfect condition until the next use.

Here's that in a few seconds, every time you will have a tool at the height and always well guarded, ready to face the most extreme of processing.

Of course, be careful not to cut yourself, we decline any responsibility.

When am I entitled to receive BITTOP?

BITTOP is an exclusive FRAISER and is not sold separately, you can only have it with the purchase of a Fraiser cutter. (not even with an accessory or non-fraiser bit, only with the purchase of a cutter directly shipped from our store)

Read yourself what the millers who chose the strong italian bit for wood say about us

Samiel Maias
Legno Lab
Get Hands Dirty
Stefano il falegname
Makers At Work
Il Pancalaio Matto
FRAISER S.r.l. - Via Luigi Galvani, 7 – 61033 – Fermignano (PU) | P.IVA IT02623070410 | €10.000 i. v. | | Copyright FraiserTools