Con l'acquisto di questo articolo riceverai 1 Fraiser point per ogni euro speso. Entra subito nel Club dei Fresatori più grande del Mondo. Info
Image Diametro (D) Altezza di taglio (I) Lunghezza totale (L) D attacco (S) Finitura SkuPriceBuy
FRESA A TAGLIENTI ELICOIDALI POSITIVI E NEGATIVI-D=4 I=15 S=4 4 15 50 4 SOPRA & SOTTO 306.040.4D £28.06 VAT included
FRESA A TAGLIENTI ELICOIDALI POSITIVI E NEGATIVI-D=5 I=22 S=5 5 22 60 5 SOPRA & SOTTO 306.050.5D £32.76 VAT included
FRESA A TAGLIENTI ELICOIDALI POSITIVI E NEGATIVI-D=6 I=22 S=6 6 22 60 8 SOPRA & SOTTO 306.060.6D £42.15 VAT included
FRESA A TAGLIENTI ELICOIDALI POSITIVI E NEGATIVI-D=6,35 I=22.2 S=6,35 6.35 22.2 63 6.35 SOPRA & SOTTO 306.063.63D £42.15 VAT included
Spiral Router Bits Z=2+2  [UP & DOWNCUT] D 8 / I 32 / S 8 / L1 7 8 32 80 8 SOPRA & SOTTO 306.080.8D £42.46 VAT included
Spiral Router Bits Z=2+2  [UP & DOWNCUT] D 9.52 / I 28.6 / S 9.52 / L1 7 9.52 28.6 76.2 9.52 SOPRA & SOTTO 306.095.95D £57.75 VAT included
Spiral Router Bits Z=2+2  [UP & DOWNCUT] D 10 / I 32 / S 10 / L1 7 10 32 80 10 SOPRA & SOTTO 306.100.10D £61.14 VAT included
FRESA ELICOIDALE Z2+2 POS/NEG HWM D=12x42x90 L1=7 S=12 DX 12 42 90 12 SOPRA & SOTTO 306.120.12D £83.32 VAT included
FRESA ELICOIDALE Z2+2 POS/NEG HWM D=12.7x34.9x88.9 L1=16 S=12.7 DX 12.7 34.9 88.9 12.7 SOPRA & SOTTO 306.127L.127D £85.76 VAT included
FRESA ELICOIDALE Z2+2 POS/NEG HWM D=16x55x110 L1=24 S=16 DX 16 55 110 16 SOPRA & SOTTO 306.160.16D £135.73 VAT included
FRESA ELICOIDALE Z2+2 POS/NEG HWM D=18x55x110 L1=30 S=18 DX 18 55 110 18 SOPRA & SOTTO 306.180.18D £182.28 VAT included
Description
Set of high quality bits in a new hard metal, Cromo quality, elaborated for a a robust and precise milled. They are surprisingly efficient and fast; the pieces are well tighteled to the cutting surface.
Applications

● To encircle, section and shape on hard wood and its derived, on laminate and plastic material..

● They can also be inserted on mandrels or on adaptors for machining centres, on point to point machines and on CNC pantographs

Ideal for

● Any type of hard wood and its derived

● Laminates

● MDF

● HDF

● Plastic material

Reccomandations

● Never use consumed or damaged router bits.

● Work with an adequate speed of progress, never force the tool

● Be particularly careful when enter the wood with router bits that have a small diameter

● Clean the tool with the supplied liquid "BITTOP" In order to obtain better results with small diameters, carry out the cut several times

FAQ - What you need to know to be a winning miller

How do I request the work parameters?

If you would like to receive the specific working parameters for your machining, immediately after you have purchased the Fraiser bits you must write us an email to assistenza@fraisertools.com specifying the following:

  1. order number
  2. type of wood to be processed
  3. available milling machine (manual, vertical on bench, spindle moulder, CNC), maximum power and speed (maximum and if fixed or adjustable)
  4. brief description of the work to be carried out

In this way our experienced engineers and technicians will have all the necessary information to communicate to you in a short time the working parameters ideally correct for your specific case.

BITTOP, to TRIPLE the duration of your strong Fraiser router bit

BITTOP is an exclusive product that serves to optimize and protect your Fraiser cutter, helping it to last three times longer than ALL OTHER alternatives.

It was created to make the most of your milling cutter, a special concentrated formula designed by us that can maintain and preserve the tools, greatly increasing their durability.

How does it work?

Once the cutter has been cleaned (with products such as TOOLSNER 3.0), before placing it in its box, just a few more drops, scattered with a finger or directly from the bottle (not with the cloth, would not remain in the cutter but would be absorbed by it ... and do not worry that it is environmentally friendly and non-toxic) in the stem and head, to keep it in perfect condition until the next use.

Here's that in a few seconds, every time you will have a tool at the height and always well guarded, ready to face the most extreme of processing.

Of course, be careful not to cut yourself, we decline any responsibility.

When am I entitled to receive BITTOP?

BITTOP is an exclusive FRAISER and is not sold separately, you can only have it with the purchase of a Fraiser cutter. (not even with an accessory or non-fraiser bit, only with the purchase of a cutter directly shipped from our store)

Read yourself what the millers who chose the strong italian bit for wood say about us

IFI
Imab
Samiel Maias
Legno Lab
Get Hands Dirty
Stefano il falegname
Makers At Work
Il Pancalaio Matto
FRAISER S.r.l. - Via Luigi Galvani, 7 – 61033 – Fermignano (PU) | P.IVA IT02623070410 | €10.000 i. v. | amministrazione@fraisertools.com | Copyright FraiserTools