Con l'acquisto di questo articolo riceverai 1 Fraiser point per ogni euro speso. Entra subito nel Club dei Fresatori più grande del Mondo. Info
Image Diametro (D) Altezza di taglio (I) Lunghezza totale (L) D Shank (S) Rotazione SkuPriceBuy
Fresa livellatrice con coltellini reversibili D 32 X 12 X 60 S=8x35 Z=3 35 10.5 60 8 DESTRA 409.350.8D £66.51 VAT included, if applicable
0735720367668 35 10.5 60 6.35 DESTRA 409.350.63D £62.53 VAT included, if applicable
Fresa livellatrice con coltellini reversibili D 38 X 12 X 60 S=12 Z=3 38 12 59 12 DESTRA 409.380.12D £70.43 VAT included, if applicable
FRESA PER SPIANARE C/COLTELLI HW Z3 S=12X50 D=60X12X80 60 12 80 12 DESTRA 409.600.12D £78.18 VAT included, if applicable
FRESA PER SPIANARE C/COLTELLI HW Z3 S=12X60 D=80X12X90 80 12 90 20 DESTRA 409.800.20D £114.60 VAT included, if applicable
FRESA LIVELLATRICE CON COLTELLINI INTERCAMBIABILI-D=100 I=12 Z=4 S=20 100 12 90 20 DESTRA 409.1000.20D £143.24 VAT included, if applicable

Spare Parts

New router bit for pantograph CNC, perfect of the quick removal of material from big surfaces. Use it on hard and soft wood, particleboard and MDF. The milling machine uses interchangeable HWM knives with three cutting edges & NOW also PCD Diamond Solution
Ideal for



● Never use consumed or damaged router bits

● Work with an adequate speed of progress, never force the tool

● Be particularly careful when enter the wood with router bits that have a small diameter

● Protect the tool with the BITTOP and Clean with TOOLSNER 3.0

● In order to obtain better results with small diameters, carry out the cut several times

FAQ - What you need to know to be a winning miller

How do I request the work parameters?

From today you can find the parameters of your CNC router Bits directly in your account.

Just be registered at the time of purchase and, depending on the milling cutter purchased, you will unlock the code in the parameters section that you can find here

If you have not logged in before completing your order and would like to receive the specific working parameters for your processing, you must write us an email to specifying the following:

  1. order number
  2. type of wood to be processed
  3. available milling machine (manual, vertical on bench, spindle moulder, CNC), maximum power and speed (maximum and if fixed or adjustable)
  4. brief description of the work to be carried out

In this way our experienced engineers and technicians will have all the necessary information to communicate to you in a short time the working parameters ideally correct for your specific case.

BITTOP, to TRIPLE the duration of your strong Fraiser router bit

BITTOP is an exclusive product that serves to optimize and protect your Fraiser cutter, helping it to last three times longer than ALL OTHER alternatives.

It was created to make the most of your milling cutter, a special concentrated formula designed by us that can maintain and preserve the tools, greatly increasing their durability.

How does it work?

Once the cutter has been cleaned (with products such as TOOLSNER 3.0), before placing it in its box, just a few more drops, scattered with a finger or directly from the bottle (not with the cloth, would not remain in the cutter but would be absorbed by it ... and do not worry that it is environmentally friendly and non-toxic) in the stem and head, to keep it in perfect condition until the next use.

Here's that in a few seconds, every time you will have a tool at the height and always well guarded, ready to face the most extreme of processing.

Of course, be careful not to cut yourself, we decline any responsibility.

When am I entitled to receive BITTOP?

BITTOP is an exclusive FRAISER and is not sold separately, you can only have it with the purchase of a Fraiser cutter. (not even with an accessory or non-fraiser bit, only with the purchase of a cutter directly shipped from our store)

Read yourself what the millers who chose the strong italian bit for wood say about us

Samiel Maias
Legno Lab
Get Hands Dirty
Stefano il falegname
Makers At Work
Il Pancalaio Matto
FRAISER S.r.l. - Via Luigi Galvani, 7 – 61033 – Fermignano (PU) | P.IVA IT02623070410 | €10.000 i. v. | | Copyright FraiserTools