Image Diametro (D) Altezza di taglio (I) Lunghezza totale (L) D attacco (S) Sku Price Buy
102.020.6D 2 4 50 6 102.020.6D £15.15
Fresa per canali - Piccole 3 8 50 8 102.030.8D £18.22
Fresa per canali - Piccole 3 8 45 6 102.030.6D £18.22
Fresa per canali - Piccole 3.2 12.7 50.8 6.35 102.032.63D £18.22
Fresa per canali - Piccole 4 10 45 6 102.040.6D £15.15
Fresa per canali - Piccole 4 10 50 8 102.040.8D £16.29
Fresa per canali - Piccole 5 12 50 8 102.050.8D £16.30
Fresa per canali - Piccole 5 12 50 6 102.050.6D £15.53
Fresa per canali - Piccole 6 15 50 8 102.060.8D £16.29
Fresa per canali - Piccole 6 16 50 6 102.060.6D £15.53
FR.102 6.3 16 50 6.35 102.063.63D £14.18
Fresa per canali - Piccole 8 20 50.8 6 102.080.6D £17.97
Fresa per canali - Piccole 8 20 50 8 102.080.8D £16.83
102.100.8D 10 20 48 8 102.100.8D £16.68
FRESA A TAGLIENTI DIRITTI ( SC ) Z=2 D=10 X 20 X 48 HWM S=6 DX 10 20 48 6 102.100.6D £16.68
FRESA A TAGLIENTI DIRITTI ( SC ) Z=2 D=12 X 20 X 50 HW S=8 DX 12 20 50 8 102.120.8D £16.68
FRESA A TAGLIENTI DIRITTI ( SC ) Z=2 D=14 X 20 X 50 HW S=8 DX 14 20 50 8 102.140.8D £16.74
FRESA A TAGLIENTI DIRITTI ( SC ) Z=2 D=15 X 20 X 50 HW S=8 DX 15 20 50 8 102.150.8D £17.37
FRESA A TAGLIENTI DIRITTI ( SC ) Z=2 D=15 X 20 X 57 HWM S=6 DX 15 20 57 6 102.150.6D £17.37
Straight router bits, short series D 16 / I 20 / S 8 16 20 57 8 102.160.8D £17.37
FRESA A TAGLIENTI DIRITTI ( SC ) 16 20 57 6 102.160.6D £18.10
Straight router bits, short series D 18 / I 20 / S 6 18 20 50 6 102.180.6D £18.20
FRESA A TAGLIENTI DIRITTI ( SC ) Z=2 D=18 X 20 X 52 HW S=8 DX 18 20 52 8 102.180.8D £18.20
FRESA A TAGLIENTI DIRITTI ( SC ) Z=2 D=20 X 20 X 50 HW S=8 DX 20 20 50 8 102.200.8D £19.26
Description
This two-cutting edges router bit is made up of a special steel in order to bear very elevated amounts of work and, normally, the best tungsten carbide for cutting edges is used together with it. Obviously we only use high-quality materials.
Applications

● Rabbeting

● Biscuit joint

● Mortise joint

● 45° lock miter cutter

● Half-lap joint

● Tongue & groove joint

● Tongue joint

● Short-term drilling

● Groove

Reccomandations

● Never use consumed or damaged router bits.

● Work with an adequate speed of progress, never force the tool.

● Be particularly careful when enter the wood with router bits that have a small diameter.

● Clean the tool with the supplied BITTOP.

● In order to obtain better results with small diameters, carry out the cut several times.

Read yourself what the millers who chose the strong italian bit for wood say about us

FRAISER S.r.l. - Via Luigi Galvani, 7 – 61033 – Fermignano (PU) | P.IVA IT02623070410 | €10.000 i. v. | amministrazione@fraisertools.com | Copyright FraiserTools