|FREE SHIPPING||TRA001-2400W||£312.22 VAT included, if applicable. Customs duties, if applicable, to be paid by the customer.||Low stock|
Powerful 2400W / 3-1/4hp electronically controlled motor. Single spanner ‘above table’ cutter changing. Automatic shaft lock and power lock-off during cutter change mode. Fast plunge depth adjustment with winder handle and fine depth adjustment with micro winder. Quick switching to conventional plunge mode. Removable plunge spring for easy lifting and adjustment. Effective dust port.
|1/2” and 12mm collet for a greater range of bit fitment|
|1450W / 3-1/4hp motor provides enough power for even the toughest timbers|
|Automatic spindle lock engages only when power switch cover is closed|
|Soft start and variable speed provides the perfect speed for all cutter types|
|Single button switches from plunge to fixed based router with rack and pinion adjustment|
|Micro winder enables continuous fine depth adjustment through the full plunge range|
|Rack and pinion height adjustment and table winder eliminates the need for expensive lifting mechanisms when used with router tables|
|Electronic speed control ensures a fine finish on all materials|
|Removable plunge spring for easy bit adjustment when table mounted|
|3-stage turret with direct reading scales for precise pre-set cut depths|
|Fully enclosed guarding provides maximum protection from the cut zone and assists dust extraction|
|Multi-function fence provides optimum control for hand-held use and circle cutting|
|Quick-fit pins for fast fitment and removal from the fence and RTA300 Router Table|
|Side air vents reduce intake of dust into the motor casing when mounted upside-down in a router table|
|Excellent dust extraction for a cleaner, safer working environment|
|Easy access brushes allows the end user to change worn brushes|
|Single wrench bit change through the base is achieved with the automatic spindle lock|
|Safety Switch Shutter locks closed in bit-change mode to prevent router being switched on|
|Depth Adjustment||Micro winder|
|Electronic Speed Maintenance||Yes|
|No Load Speed||8000-21000rpm|
|Plunge Range||0 - 68mm|
|Power On Indicator||Neon|
|Safety Power Switch||Yes|
|Sound Power LW||100.8dB|
|Sound Pressure LP||89.8dB|
|Speed Maintenance Under Load||8000 - 21,000rpm|
|What's in the box - 01||1 x TRA001 2400W Plunge Router|
|What's in the box - 02||1 x Table Winder|
|What's in the box - 03||1 x ½” Collet|
|What's in the box - 04||1 x 12mm Collet|
|What's in the box - 05||1 x Multi-Function Fence|
|What's in the box - 06||1 x Collet Spanner|
|What's in the box - 07||1 x Instruction Manual|
|Table height winder|
Your Triton Guarantee
To activate the extended 3 year guarantee you must register the product at www.tritontools.com within 30 days of purchase. Should you not wish to register, a standard 30 day guarantee period will apply.
This guarantee, and the guarantee period, begins on the date of retail purchase as detailed on your sales receipt.
If this product develops a fault within 30 days of purchase, return it to the stockist where it was purchased, with your receipt, stating details of the fault.
If this product develops a fault after 30 days a guarantee claim must be submitted.
Your original receipt indicating the place and date of purchase and product designation, precise details of the fault requiring correction, your guarantee certificate, and your name and address must be submitted to validate the claim.
We do not refund carriage. All products should be in a suitably clean and safe state for repair, and should be packaged carefully to prevent damage or injury during transportation. We may reject unsuitable or unsafe deliveries.
All work will be carried out by Triton Tools or its appointed repair agents. The repair or replacement of the product will not extend, or renew the period of guarantee. Retained tools, or parts, for which a replacement has been issued, will become the property of TritonTools. The repair or replacement of your product under this guarantee provides benefits which are additional to, and do not affect, your statutory rights as a consumer.
What is covered
- The repair of the product, once verified to the satisfaction of Triton Tools, that the defect is due to faulty materials or workmanship. If any part is no longer available or out of manufacture TritonTools may replace it with a functional replacement.
What is not covered
- Normal wear and tear caused by use in accordance with the operating instructions e.g. blades, brushes, belts, bulbs, batteries etc.
- Accidental damage, faults caused by: improper use, abnormal environmental conditions, overloading, insufficient maintenance, careless operation or handling of the product.
- Use of the product for anything other than normal domestic purposes.
- Change or modification of the product in any way.
- Defects caused by the use of parts or accessories which are not Triton genuine components.
Completa al meglio il tuo lavoro con
Gli altri fresatori hanno visto anche
FAQ - What you need to know to be a winning miller
From today you can find the parameters of your CNC router Bits directly in your account.
Just be registered at the time of purchase and, depending on the milling cutter purchased, you will unlock the code in the parameters section that you can find here
If you have not logged in before completing your order and would like to receive the specific working parameters for your processing, you must write us an email to firstname.lastname@example.org specifying the following:
- order number
- type of wood to be processed
- available milling machine (manual, vertical on bench, spindle moulder, CNC), maximum power and speed (maximum and if fixed or adjustable)
- brief description of the work to be carried out
In this way our experienced engineers and technicians will have all the necessary information to communicate to you in a short time the working parameters ideally correct for your specific case.
BITTOP is an exclusive product that serves to optimize and protect your Fraiser cutter, helping it to last three times longer than ALL OTHER alternatives.
It was created to make the most of your milling cutter, a special concentrated formula designed by us that can maintain and preserve the tools, greatly increasing their durability.
How does it work?
Once the cutter has been cleaned (with products such as TOOLSNER 3.0), before placing it in its box, just a few more drops, scattered with a finger or directly from the bottle (not with the cloth, would not remain in the cutter but would be absorbed by it ... and do not worry that it is environmentally friendly and non-toxic) in the stem and head, to keep it in perfect condition until the next use.
Here's that in a few seconds, every time you will have a tool at the height and always well guarded, ready to face the most extreme of processing.
Of course, be careful not to cut yourself, we decline any responsibility.
When am I entitled to receive BITTOP?
BITTOP is an exclusive FRAISER and is not sold separately, you can only have it with the purchase of a Fraiser cutter. (not even with an accessory or non-fraiser bit, only with the purchase of a cutter directly shipped from our store)